Auraton T-1 RTH - Wireless Temperature Controller

Usage:
Wireless temperature controller for controlling air-conditioner devices and heating devices with a pre-installed battery up to 20 years of operation.

AURATON T-1 RTH
A new, the highest quality, wireless, ultra-efficient temperature controller, designed on the basis of advanced microprocessor.

Basic features of a unit

Pre-installed lithium battery
A wireless temperature controller is equipped with a highest quality lithium battery produced by a Swiss Company(Swatch Group).Such a battery provides an uninterrupted operation time of a controller AURATON T-1 up to 20 years. Standard temperature controllers usually require the battery replacement. Therefore, the standard thermostat uses 20-40 batteries within 20 years. This causes additional costs and introduces harmful substances to the environment.

Operates with a load up to 16A
A receiver AURATON T-1 RTH is equipped with a relay that can operate with load up to 16A. It uses low-ignition technology of voltage switching.

Interference- free communication between appliances
AURATON T-1 and AURATON RTH communicate at the frequency of 868 MHZ. A very short encoded transmissions( 0.004s) provide an efficient and interference - free device operation.

Algorithm of memory ON/OFF cycles
Receiver AURATON RTH is equipped with an unique algorithm of analysis of ON/OFF cycles. Cycles from the past 24 hours are stored in a memory of the receiver RTH.
In case the signal between controller T-1( and/or thermometer T-2) breaks, RTH receiver will automatically continue the execution of stored OFF-ON cycles from the past 24 hours. It enables to restart the transmission(remove interfere) or to repair a controller T-1, with no significant modification(worsening) of heating comfort in a controlled room.

Basic elements of the system

AURATON T-1 - wireless temperature controller
A wireless temperature controller is designed on the basis of advanced microprocessor, optimized for an operation on one battery up to 20 years. It makes the appliance to be one of the most ecological controller on the world(pre-installed battery). Additionally it is one of the easiest – to – use wireless temperature controller on the market.

AURATON RTH - a receiver
A receiver AURATON RTH installed near the heating device or air-conditioner is equipped with a relay which can operate at load up to 16A.
Its wireless communications with a temperature controller does not require any additional installation work, like leading wiring from a controller to the receiver.
Synchronization of temperature controller and a receiver AURATON RTH is very simple. It only requires pressing 2 buttons located on both devices.
LEDs diodes enable a very easy control of a device operation status.

Additional elements of the system (are purchased separately)

A receiver AURATON RTH can work with additional , wireless devices ensuring a temperature comfort in a building and energy consumption savings at once.
(additional units are equipped with a pre-installed battery ensuring an operation up to 20 years)

AURATON H-1 - window handle (sold separately)
The optional element of a system is a window handle equipped with a transmitter and its position sensors. It enables to indicate the status of a window.
A handle sends signal to the receiver RTH, which stimulate a relay to operation, for example after switching the heating appliance on, when a window is open or decreasing the temperature at 3°C when a window is raised. It enables to safe an energy. Receiver can support(control) up to 25 handles.

AURATON T-2 - thermometer (an element sold separately)
This optional element of a system enables to control the temperature in different rooms than the one in which a controller AURATON T-1 is placed.
Example: We want to adjust a temperature in a children room to 22°C. But we don’t want the children to have a possibility of changing the temperature. In this case it is required to install the thermometer AURATON T-2 in a children room, and a controller AURATON T-1 for example in a kitchen. This enables to keep the temperature in children room amounting 22°C, regardless of temperature fluctuations which occur in the kitchen.

Operation with heating devices- possible configurations

RTH + T-1

Temperature control in a place where a wireless temperature controller T-1 is placed.
Basic configurations, essential for controlling the heating device. Pairing a receiver AURATON RTH with a wireless temperature controller AURATON T-1 gives a possibility to set the temperature manually and control it in a place where the controller is installed.

RTH + T-1 + T-2

Controlling of the temperature in another room, that the one in which the controller T-1 is installed.
If the receiver RTH will be paired with controller T-1 and thermometer T-2, it will be possible to control a temperature in another room(different from the one where a controller is installed)
Example: We want to adjust a temperature in a children room to 22°C. But we don’t want the children to have a possibility of changing the temperature. In this case it is required to install the thermometer AURATON T-2 in a children room, and a controller AURATON T-1 for example in a kitchen. This enables to keep the temperature in children room amounting 22°C, regardless of temperature fluctuations which occur in the kitchen.
.

RTH + T-1 + H-1

Controlling of a temperature in cooperation with window position sensor
This setting allows to control the temperature in a room, taking into account a window position status.

window closed – a temperature control is normally done,
window raised – a receiver RTH decreases a temperature at 3°C,
window open( for more than 30s.) - a receiver RTH will switch off the heating system.

RTH + T-1 + T-2 + H-1

Controlling of a temperature in cooperation with window position sensor( in another room)
It enables to control the temperature in different room than the one in which a controller AURATON T-1 is placed, taking into account a window position status.

Operation with a air-conditioner system

RTH + H-1

Receiver AURATON RTH ( connected to the air conditioning device) paired with window handle AURATON H-1.

If the window in the room will be closed, air-conditioner will be operating. If the window will be opened or raised for more than 30s., a receiver AURATON RTH will switch off the air conditioner.
If all windows will be closed again, after a period of not less than 90seconds(from the last switching off) the air conditioner will be activated. A delayed restarting is supposed to prevent appliance from a rapid passing between on/off mode, which can cause injury of a compressor.

Advantages

wireless
pre-installed battery( up to 20 years of operation)
extremely simple and intuitive handling
up to 16A resistive relay load
unique algorithm of memory ON/OFF cycles from the last 24 hours

Dane Techniczne

Working temperaure range:	0 – 45°C
Temperature adjustment range:	7°C; 15 – 35°C
Hysteresis:	±0,2°C
Temperature levels:	1
Antifrezze temperature:	+7°C
Working cycles:	daily
Working mode control:	LEDs
Maximum amperage:	~16A
Power supply T-1:	lithium battery (pre-installed - up to 20 years)
Power supply RTH:	230VAC, 50Hz
Operation range:	indoor: 30m outdoor: 300m

User Manual

AURATON T1 RTH - User Manual